90 degree Flush Radius Elbow for 1.5 inch O.D. Tubing, Polished Brass (00-731/1H)
Materials/Finishes:
- Polished Brass
Compatible Tubing Wall Thickness:
- .050"
Tubing OD:
- 1.5"
Estimated Lead time: 3-5 business days before shipment.
The radius bend on this 90° flush elbow lets a hand travel through the corner without leaving the rail: a 1.5" OD handrail turns on a smooth, graspable curve rather than a sharp angle. Four finishes: polished brass, 304 polished or satin stainless, and 316 satin stainless for coastal decks.
Description
This flush elbow rounds a 1.5" OD handrail through a 90° corner with a smooth curve, keeping a hand moving continuously around the turn — the reason a radius bend gets specified over a sharp corner on primary grip rails. Slide a tube into each end for a flush joint. It suits the right-angle turns at building corners and landings on a main handrail, on one flight or throughout a building. It comes in four finishes: polished brass for a traditional rail, 304 stainless polished or satin for a modern interior, and 316 stainless satin where salt or chlorine calls for corrosion resistance — a coastal deck or a high-touch rail, where satin also hides fingerprints. If you want a polished 316 finish at a 90° corner, the sharp-angled 90° flush elbow offers it. Note the OD won't interchange with 1" or 2" tubing.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
